Used WAGNER 1200t (The press was upgraded to 1200 tonnes by OILGEAR) open-die forging press with sliding table. The press was overhauled and modernised in 2006 and 2019. Diameter of main cylinder: 710 mm Diameter of the retraction cylinders: 225 mm Working pressure at 1000 t pressing force: 250 bar Retraction force: 200 tonnes Pump capacity: 3 x 225 kW Total useful flow: 1500 litres/min, 3 x 500 litres Working speed: 4 to 80 mm/ s (±5%) Retraction speed: 150 mm/ s (possible up to 200 mm/s) Forging force = work: from 0 t (±5 bar) to l000 t (±10 bar) Precision when stopping: ± 1.5 mm
Used BLISS 2750t open-die forging press with sliding table for 3 dies. The press was built in 1996 and completely overhauled in 2016 and equipped with powerful OILGEAR-TOWLER pumps and a new control system. Nominal pressing force: 2,500 tonnes Maximum pressing force: 2,750 tonnes Pressing speed: 56 mm/s at 2,000 tonnes Pressing speed: 45 mm/s at 2,500 tonnes Number of strokes/min in the levelling cycle at 400 t: 72 strokes/min. Ram stroke: 1,525 mm Clearance between the columns: 1,850 mm Maximum opening without removing the mould holder: 2,800 mm Ejector in the lower table: stroke of 610 mm and force of 170 tonnes Lower table with cylinder displacement: Space for 3 moulds The positioning of the ram as well as the force and speed are regulated by a programmable control system. A microcomputer is used to create and save programmes at the workstation.
Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used.
sotec GmbH
Gewerbestr. 14
77694 Kehl
Germany
+49.(0)7851. 955 800
+49.(0)7851. 955 801
+49.(0)160. 975 202 02
info@sotec4u.com
www.sotec4u.com